SYSTEM FEATURES

No Welding Needed, Install Kits Using Basic Tools

Available with 12 or 24 volt DC smoke oil pumps at no additional cost

Panel Mount with the Mini 3 way switch and LED with the MIL spec label or
use the supplied bracket to mount everything remote!

"3 way switch" selection control.  Up to run smoke continuous (led on).  Middle off position (led off). Down arms remote momentary switch (included), (led on only when remote button is pressed for smoke).

Mil spec plastic label 1 3/8" wide x 2" tall, panel or bracket mount (included). Wiring is "plug and play" color coded easy!

Remote Momentary Switch

Install this switch in your control stick, throttle or whatever location works best for your application. 

Note: this switch can be replaced with any "push on – push off" or momentary switch already installed in your control stick or throttle.

All kits are supplied with:

Pre-assembled and wired relay / breakers bracket with 1/8" holes drilled and rivets provided
for multiple installation options (under / behind your panel etc..) !

Because the function of your smoke system is not critical to flight, the breakers can be mounted out of sight therefore eliminating the need for "real-estate" (or to drill large holes) on the face of your panel.  If a breaker pops it can be safely re-set and system checked "on the ground!" 

VCAS™ (Visual Collision Avoidance System)

SHOULDN'T WE ALL HAVE THIS FEATURE IN OUR AIRPLANES? VCAS IS A REGISTERED TRADE MARK OF SMOKING AIRPLANES LLC.

BACK TO TOP OF PAGE