Below are photo examples of smoke system installations in a variety of planes:
Pitts S1S with 3.5V
Owner: Adve Aslesen
Installation by: Jeff at www.WestMetroAviation.com
Photos by: T.C. "Ted" Chang
System installed between rudder pedals
T34A with 3.5H
Submitted by: Eric Evans
Includes remote switch kit, 2nd injector kit, 24-volt DC to 12-volt DC converter
Nanchang CI6A with 3.5
Submitted by: Kert Howerton
Includes single injector kit
View of external fill fitting installed on fuselage of a Nanchang CI6A | View of external fill kit installed on old ADF rack in Nanchang CI6A |
RV8 with 5.5H
Submitted by: Keith Vasey
5.5 gallon system installed in front baggage area | |
RV8 injector installation on the tailpipe after the heater muff | RV8 t-bulkhead fitting installation for a double injector system |
Front baggage well | Mounted 3-way switch on panel |
RV7 with 3.5V
Submitted by: Don Hall
Installed behind right seat in the baggage area
Glasair 1 RG with 3.5H
Submitted by: Marco Guscio at www.p3flyers.ch
Installed on rear baggage floor using ratchet strap with eye bolts instead of supplied brackets. (a minimum of two ratchet straps are recommended)
Pitts S1S with 3.5V
Submitted by: Thomas Rybarczyk
Includes 2nd injector kit and remote switch kit
Oil pump bracket mounted on the front of the oil tank | Injector installation from the "T" bulkhead fitting |
Just fits under the fuel tank | View from pilot seat |
Pitts S1T with 3.5V
Includes oil mixture valve accessible to pilot
|
View from firewall to rear of airplane (the oil pump can be mounted vertically on the bracket as well) |
Other Installation Photos
Super Decathlon 3.5H | 3.5H configured for the rear baggage area in a F1 rocket |